Flush Fit
Sinks which are factory fitted to Simmons Epoxy Worktops may be 'flush-fitted'. This type of fitment provides a smooth crevice free joint suitable where cleanliness and decontamination are important.
This fitment method is only available for sinks factory fitted into Simmons Epoxy Worktops.

Diagrams
Flush Fitment![]() |
![]() Product Dimensions - see table below |
Product Dimensions
All dimensions in millimetres.
Sizes shown are nominal. There can be slight variations from sink to sink due to the nature of epoxy resin.
Sink weights will vary with colour. Weights shown are for grey.
Outlet position assumes the sink is oriented with the longer side facing the front of the worktop.
Sinks are designed to accept a waste fitting - 73mm dia. flange / 1.5" BSP.
* Due to its weight and capacity, the SEL16 requires additional support from beneath when fitted.
Sinks can also be drilled to accept an overflow fitting. Simmons can supply sinks complete with a waste and overflow if requested