Drop-on sinks are designed to be easily fitted to any type of worktop material. They have self-rimming flanges which will conceal the core layer of a laminated worktop.

The sink is self-supporting on its integral flange and can be bonded in place with silicone sealant or Epoxy Resin grout. The same raised flange has a smooth 45 face to the outside that will allow the user to wash liquids over it but prevent accidental spillage of materials into the sink.

The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting. Simmons can supply sinks complete with a polypropylene waste and overflow if requested.

Diagrams

Drop-On Sink Fitment

Product Dimensions - see table below

Product Dimensions

Sink Code Internal Length Internal Width Internal Depth Exter-nal Height Flange Width Flange Thick-ness Waste C/L From Side Waste C/L From Rear Waste Position Intenal Radius Weight KG PDF
  A B C D E F G H R
SGS2-DO 256 108 150 165 28 6 128 54 centre 20 2 download a pdf
SDS5-DO 300 200 200 213 38 8 85 100 end 30 4 download a pdf
SS6-DO 350 300 200 218 38 9 85 150 end 30 5 download a pdf
SM8-DO 450 365 200 210 38 9 225 85 rear 30 7 download a pdf
SGL10-DO 400 400 300 330 38 7 200 85 rear 30 9 download a pdf
SEL16-DO 600 450 300 315 38 9 300 80 rear 30 12 download a pdf

All dimensions in millimetres.
Sizes shown are nominal. There can be slight variations from sink to sink due to the nature of epoxy resin.
Sink weights will vary with colour. Weights shown are for grey.
Outlet position assumes the sink is oriented with the longer side facing the front of the worktop.
Sinks are designed to accept a waste fitting - 73mm dia. flange / 1.5" BSP.
Sinks can also be drilled to accept an overflow fitting. Simmons can supply sinks complete with a waste and overflow if requested

Recommended Cut-Out Sizes

Sink Code Length Width Corner
  L W Rad R
SGS2-DO 285 135 36
SDS5-DO 337 237 50
SS6-DO 370 320 36
SM8-DO 480 395 36
SGL10-DO 415 415 30
SEL16-DO 636 486 48