Drop-in sinks have a gloss finish to the top of the sink flange and feature a smooth radius to the top inside corner. They are designed to fit flush into a rebated cut out in a worktop, and be sealed in place with silicone sealant or Epoxy Resin grout.

These sinks are designed for use with any worktop material, but are particularly suitable for use with laminate worktops. They are fitted through the worktop from above and therefore cover the core material of the laminate which would otherwise be exposed.

The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting. Simmons can supply sinks complete with a polypropylene waste and overflow if requested.

Diagrams

Drop-In Sink Fitment

Product Dimensions - see table below

Product Dimensions:       

We are currently developing and rationalising our Drop-In sink offering.  All current Drop-In sinks remain available but are in the process of being replaced by a new range with uniform flange thickness and profile.  Please contact us for up to date information.
Sink Code Internal Length Internal Width Internal Depth External Height Flange Width Flange Thick-
ness
Waste C/L From Side Waste C/L From Rear Waste Position Intenal Radius Weight KG PDF
  A B C D E F G H R
SGS2-DI 256 108 150
SDS5-DI 300 200 200
SA5-DI 356 254 152
SA5-DIC 356 254 152
SS6-DI 350 300 200
SN9-DI 406 303 203
SM8-DI W 450 367 130
SM8-DI 450 367 195
SM8-DI X 450 367 280
SGL10-DI 400 400 300
SEL16-DI 600 450 300
SVL15-DI 635 381 254

All dimensions in millimetres.
Sizes shown are nominal. There can be slight variations from sink to sink due to the nature of epoxy resin.
Sinks are designed to accept a waste fitting - 73mm dia. flange / 1.5" BSP.
Sinks can also be drilled to accept an overflow fitting. Simmons can supply sinks complete with a waste and overflow if requested

Recommended Cut-Out Sizes